Teak Wonder Brightener is a lightening process used to eliminate shading from the teak which may still persist even after the application of the Teak Wonder Cleaner. The application of Teak Wonder Brightener is not always necessary, but when used on aged surfaces it has an effect that seems miraculous: the teak immediately regains its natural colour (like newly sanded but withut removing precious layers of grain). The brightening process should be carried out on a wet surface, ideally straight after clearing. Apply the brightener sparingly and evenly to avoid a patchy result then wash the deck with a soft bristle brush, accross the grain (do not apply too much pressure, this avoids damaging the teak fibres). The effect of the teak Wonder Brightener is immediate and the result instant. As with the cleaner, rinse away the solution with plenty of fresh water. The product is neither caustic nor aggressive, and will not damage rubber seals, paint or hardware. Wipe any drips immediately off non teak surfaces. The coverage is approximately 6-8 m² / ltr (depending on the condition of the wood). Once dry, the surface is ready for application of protective Teak Wonder Dressing Sealer.